سؤالات متداول خط تولید خوراک ماهی
When carrying out fish pellet production, it is very important to choose the right fish feed production line. The following are the frequently asked and answered questions about the floating fish pellet machine summarized from our experience for your reference.
ماشین آلات در فرآیند تولید خوراک ماهی شناور

Q1: During the fish feed production line, usually spray some oil at the last step. When spraying oil, the oil temperature is 30-50 ℃, what kind of oil is proper?
A1: در طول زمان پاشش ، گریس را اضافه کنید. به طور کلی ، بیشتر چربی حیوانات است. از آنجا که این امر بهتر است القاء غذا شود ، گاهی اوقات ریزگردها نیز اضافه می شوند.
Q2: How to use the cooler?
A2: 5-10 دقیقه از کولر استفاده کنید و خنک شود تا دمای طبیعی.
Q3: What are the options for omitting the counter-current cooler?
A3: 1) Make a large bin for storing the finished product. But without a cooler, you can use a longer cooling conveyor belt.
2) If it is a small fish feed production, sometimes the feed pellets will dry on the ground for a while.
3) Directly send them to the bin, which also needs to be cooled. Otherwise, the feed pellets will go bad due to the non-cooling.
Q4: How about the motor for the mesh belt?
A4: موتور کمربند مش تبدیل فرکانس است و سرعت قابل تنظیم است.
Q5: کدام یک مناسب است دستگاه پلت خوراک ماهی در طول خط تولید خوراک ماهی؟
A5: اکسترودر خوراک ماهی ظرفیت را تعیین می کند ، بنابراین ، ما می توانیم آن را با خط تولید مناسب بر اساس دستگاه اصلی مطابقت دهیم.
Q6: What is the application range for this commercial fish feed production line?
A6: Application range: fish feed, pet feed, cattle feed, poultry feed, just change different molds.
Components of the fish feed production machine

Q1: Disadvantages of using the ring mill, and flat mill to do sinking feed
A1: 1) Low absorption rate.
2) Sink into the water, fish eaten or not eaten? Nobody can see! Feeding staff regularly feed, causing waste!
3) Feed sinking into the bottom pollutes water quality.
Q2: Why use the heating ring to produce the fish feed?
A2: حلقه گرمایش عملکرد پف کردن دارد. و خوراک پف شده برای هضم حیوانات و جذب مواد مغذی مفید است.
Q3: What about the blades?
A3: تیغه ها قطعات فرسوده هستند، هر قطعه 2 یوان، با 4 قطعه ارسال می شود.
Q4: How about the spiral sleeve?
A4: آستین مارپیچی 40cr ماده ، سختی HRC55-60 است.
روشها به خوراک ماهی را تولید کنید

Q1: What is the puffin temperature in the fish feed production line?
A1: دمای پف کردن 100-120 درجه است.
Q2: How much water should be added?
A2: به طور کلی، مواد خام متعلق به مواد پودر خشک است، اضافه کردن 15-18% آب.
Q3: Who has the intention to use the dry method to produce the fish feed?
A3: متقاضیان خط تولید کوچک و متوسط معمولاً روش خشک را بیشتر انتخاب می کنند.