When carrying out fish pellet production, it is very important to choose the right fish feed production line. The following are the frequently asked and answered questions about the floating fish pellet machine summarized from our experience for your reference.
Machines in the floating fish feed production process
Q1: During the fish feed production line, usually spray some oil at the last step. When spraying oil, the oil temperature is 30-50 ℃, what kind of oil is proper?
A1: During the spraying time, add grease. Generally, it’s mostly animal grease. Because this is better to induce food, sometimes microelements are also added.
Q2: How to use the cooler?
A2: Use the cooler for 5-10 minutes, cooling to normal temperature.
Q3: What are the options for omitting the counter-current cooler?
A3: 1) Make a large bin for storing the finished product. But without a cooler, you can use a longer cooling conveyor belt.
2) If it is a small fish feed production, sometimes the feed pellets will dry on the ground for a while.
3) Directly send them to the bin, which also needs to be cooled. Otherwise, the feed pellets will go bad due to the non-cooling.
Q4: How about the motor for the mesh belt?
A4: The mesh belt motor is frequency conversion, and the speed can be adjusted.
Q5: Which one is the proper fish feed pellet machine during the fish feed production line?
A5: The fish feed extruder determines the capacity, so, we can match it with the suitable manufacturing line based on the main machine.
Q6: What is the application range for this commercial fish feed production line?
A6: Application range: fish feed, pet feed, cattle feed, poultry feed, just change different molds.
Components of the fish feed production machine
Q1: Disadvantages of using the ring mill, and flat mill to do sinking feed
A1: 1) Low absorption rate.
2) Sink into the water, fish eaten or not eaten? Nobody can see! Feeding staff regularly feed, causing waste!
3) Feed sinking into the bottom pollutes water quality.
Q2: Why use the heating ring to produce the fish feed?
A2: The heating ring has a puffing function. And the puffed feed is good for animal digestion and nutrient absorption.
Q3: What about the blades?
A3: The blades are worn parts, 2 yuan a piece, shipped with 4 pieces.
Q4: How about the spiral sleeve?
A4: The spiral sleeve is 40cr material, hardness HRC55-60.
Methods to manufacture the fish feed
Q1: What is the puffin temperature in the fish feed production line?
A1: The puffing temperature is 100-120 degrees.
Q2: How much water should be added?
A2: Generally, the raw material belongs to the dry powder material, adding 15-18% of water.
Q3: Who has the intention to use the dry method to produce the fish feed?
A3: Small and medium-sized production line demanders generally choose the dry method more.