Maswali ya mstari wa uzalishaji wa samaki
When carrying out fish pellet production, it is very important to choose the right fish feed production line. The following are the frequently asked and answered questions about the floating fish pellet machine summarized from our experience for your reference.
Mashine katika mchakato wa uzalishaji wa chakula cha samaki wanaoelea

Q1: During the fish feed production line, usually spray some oil at the last step. When spraying oil, the oil temperature is 30-50 ℃, what kind of oil is proper?
A1: Wakati wa kunyunyizia dawa, ongeza grisi. Kwa ujumla, ni mafuta ya wanyama. Kwa sababu hii ni bora kushawishi chakula, wakati mwingine microelements pia huongezwa.
Q2: How to use the cooler?
A2: Tumia ubaridi kwa dakika 5-10, ukipoe hadi joto la kawaida.
Q3: What are the options for omitting the counter-current cooler?
A3: 1) Make a large bin for storing the finished product. But without a cooler, you can use a longer cooling conveyor belt.
2) If it is a small fish feed production, sometimes the feed pellets will dry on the ground for a while.
3) Directly send them to the bin, which also needs to be cooled. Otherwise, the feed pellets will go bad due to the non-cooling.
Q4: How about the motor for the mesh belt?
A4: Gari ya ukanda wa matundu ni ubadilishaji wa masafa, na kasi inaweza kubadilishwa.
Swali la 5: Ni ipi iliyo sahihi mashine ya pellet ya kulisha samaki wakati wa uzalishaji wa chakula cha samaki?
A5: Extruder ya kulisha samaki huamua uwezo, kwa hiyo, tunaweza kuifananisha na mstari wa utengenezaji unaofaa kulingana na mashine kuu.
Q6: What is the application range for this commercial fish feed production line?
A6: Application range: fish feed, pet feed, cattle feed, poultry feed, just change different molds.
Components of the fish feed production machine

Q1: Disadvantages of using the ring mill, and flat mill to do sinking feed
A1: 1) Low absorption rate.
2) Sink into the water, fish eaten or not eaten? Nobody can see! Feeding staff regularly feed, causing waste!
3) Feed sinking into the bottom pollutes water quality.
Q2: Why use the heating ring to produce the fish feed?
A2: Pete ya kupokanzwa ina kazi ya kuvuta. Na malisho yenye majivuno ni nzuri kwa usagaji chakula wa wanyama na ufyonzaji wa virutubisho.
Q3: What about the blades?
A3: vile vile ni sehemu zilizovaliwa, yuan 2 kipande, kusafirishwa kwa vipande 4.
Q4: How about the spiral sleeve?
A4: Sleeve ya ond ni nyenzo ya 40cr, ugumu wa HRC55-60.
Mbinu za kutengeneza chakula cha samaki

Q1: What is the puffin temperature in the fish feed production line?
A1: Joto la kuvuta pumzi ni digrii 100-120.
Q2: How much water should be added?
A2: Kwa ujumla, malighafi ni mali ya poda kavu, na kuongeza 15-18% ya maji.
Q3: Who has the intention to use the dry method to produce the fish feed?
A3: Wahitaji wa laini ndogo na za kati kwa ujumla huchagua njia kavu zaidi.